这是Apad iRobot的出厂固件。这个固件不会对于你的Apad带来任何改进的。只是Batch 3的可用。当你的内置快闪记忆体是0MB,请把Apad连接至PC电脑,把Apad的硬盘格式化FAT32。

“关机状态下,USB数据线一端连接Apad。USB端口,一端连电脑USB端口,长按住Menu键和开机键(升级过程中,长按住这两个键不松手),示意已找到升级设备,如下图所示。此时点击“升级”。”

下载地址

As the factory installed firmware, this does not add any functionality to your Apad iRobot batch 3 unit. Do not flash if you own any previous batches. If your internal flash is showing 0 MB, plug in your Apad iRobot to your computer and format it to FAT32.

Append: To get your batch 3 Apad iRobot to detect, you need to hold the Menu and Power key down for the duration of the detection and flash. Start with the device off, and proceed to hold the Menu button, then the Power button to enter flash mode.

Download link

Categories: Company Blog

20 Responses so far.


  1. Kamran 说道:

    I’m having some trouble identifying my Apad iRobot..so i can upgrade the firmware..

    Here is my settings info:

    Model number: sdkDemo
    Fireware version: 1.5
    Kernel version : 2.6.25 rockchip version 1.7.4 (yuxing)
    Build Number: RK-1.3.2.eng.root.20100612.025602

    Should I flash using this download?

  2. everts 说道:

    My blue led apad came from lunarsources and with this update wi fi doesn´t work.
    The firm that works perfect for it is this one:BlueLED RK2808a Tablet 0630CN

    • chip3c_english 说道:

      You got one of the sample batches coming from another factory. It is not our batch 3, so please don’t misinform our customers here. Thanks.

      We already tried to clarify that. You would have had 0630 firmware and a blue LED.

  3. Charles Harris 说道:

    This firmware works and is in English. blueLEDtestROM0.3.img. Email works as well as market. Wifi works but only a single dot of signal strength.

  4. Cuzchris 说道:

    I tried to update my new blue led irobot from 0612CN to 0630CN and the wifi doesn’t work and then it crash’s after restart. is there an 0630EN that works and does it boost the wifi any ?

  5. Cuzchris 说道:

    I’m starting to get a little dissapointed I bought this thing expecting it to be a little better than a phone but the wifi’s range ls like about 1 meter and it can’t Evan play the marble game that comes pre installed

  6. everts 说道:

    I´ve tried 0.3 in my blue led apad from lunarsources and wi fi works!!!, and not only a single dot of signal, it´s signal full. Thanks xaueious

  7. Charles Harris 说道:

    I’m glad it work without an issue for you. Could you tell me what your kernel information says about your device
    My info is below. Did you have start the USB OTG to get wifi turned on?

    Model number: sdkDemo
    Fireware version: 1.5
    Kernel version : 2.6.25 rockchip version 1.2.7 (rugian)
    Build Number: RK-1.3.2.eng.root.20100612.025602

  8. Rebecca 说道:

    I flashed this and can not get wifi to work. I am wondering if it is a setting or what could be wrong. Can you please help me?

  9. Charles Harris 说道:

    Did you turn on the USB OTG in settings first before starting WIFI? See my post under Batch 3 Devices Now Being Distributed. This firmware I mentioned solved my problems. It should work if the information about your device look like the following:

    Model number: sdkDemo
    Fireware version: 1.5
    Kernel version : 2.6.25 rockchip version 1.2.7 (rugian)
    Build Number: RK-1.3.2.eng.root.20100612.025602

  10. Rebecca 说道:

    Yes that is what the information says now that I have the FW on there but when I check the box for USB host then go to wireless controls and turn on the wifi, it says unable to start WI-FI.

    Please can you help me?

    • Charles Harris 说道:

      If you are using 0612 it did not work for me either. The best firmware right now is on the tabletstore website. It is blue-led-5.1-type2.img. This is the most stable firmware to date and in English. I can turn on WiFi anytime without issues after starting USB OTG.

      I believe you will be happy with what I’ve suggested above.

  11. andy 说道:

    第3版的mid都只有25mbㄇ回復出廠

  12. JL 说道:

    I’m having the below unit:

    Model: sdkdemo
    Kernel: 2.6.25 rockchip version 1.2.7 (ruiguan)
    Build: RK-1.3.2.eng.root.20100706.141140

    Red Led with front camera and metal back cover.

    Can advise which batch I’m having and which firmware should I update.

    Thank you.

  13. M.Hekal 说道:

    I don’t know what batch all I know is that it has front camera, version 1.6, AC 9 volt, no USB2 but Ethernet/USB adaptor, Memory 256, Kernel version 2.6.29-00236-g4f8dbbb-dirty, and Build# 1.9
    I’ve tried to connect it to PC XP 32-bit using above method (hold MENU/POWER), with no response my Apad doesn’t have mini USB but only Ethernet/USB adaptor. Kindly advise how to connect to PC and how to upgrade.

  14. Taner 说道:

    Hi can anyone please tell me how to install the drivers? I have downloaded the flashing tool but the driver files are .sys no installer. please some advise me on how I can install the drivers.

    Thanks
    Taner